How to pack your products for shipping

Materials you need

• •A box at least 2 inches bigger on every side than the item
• •Bubble wrap or crumpled paper for cushioning
• •Packing tape (seal every edge, not just the top flap)

Step by step

1. 1.Wrap each piece individually in bubble wrap, securing it with tape so it cannot unwrap in transit.
2. 2.Line the bottom of the box with a 2-inch layer of crumpled paper or bubble wrap.
3. 3.Place wrapped items so they do not touch each other or the sides of the box.
4. 4.Fill every remaining gap so nothing can shift, then shake the closed box gently — if you hear movement, add more filler.
5. 5.Seal all edges and corners with tape; label the box "Fragile" on at least two sides.

What to avoid

• ✕Never let two fragile pieces touch directly, even if both are wrapped.
• ✕Do not reuse a box with existing dents or weak corners.
• ✕Do not leave empty space unfilled — movement is what breaks fragile items, not weight.

Materials you need

• •The original box if available, or a sturdy double-walled box
• •Anti-static or bubble wrap for the item itself
• •Rigid cardboard inserts to stop batteries or loose parts moving

Step by step

1. 1.Remove batteries where possible and pack them separately, taped so terminals cannot touch.
2. 2.Wrap the item in bubble wrap, keeping any cables coiled and secured with a tie so they do not snag.
3. 3.Place the item in the centre of the box with cushioning on all sides, not just top and bottom.
4. 4.Add a note inside the box listing what is included, for the customer's reference.
5. 5.Seal and label the box "Handle with care — electronic item".

What to avoid

• ✕Do not ship loose batteries touching metal objects.
• ✕Do not fold or crush cables to save space.
• ✕Do not skip cushioning on the sides — most damage happens from sideways impact, not drops.

Materials you need

• •A corrugated box rated for the item's weight (check the box manufacturer's weight limit)
• •Corner protectors or extra cardboard for edges
• •Heavy-duty tape — reinforce every seam, not just the centre

Step by step

1. 1.Disassemble removable parts where possible and pack them alongside, clearly labelled.
2. 2.Wrap sharp corners and edges with extra cardboard or protectors before boxing.
3. 3.Reinforce the bottom of the box with an extra layer of tape in an "H" pattern — this is where weight stresses the box most.
4. 4.Fill all gaps with packing paper so the item cannot shift inside the box during transit.
5. 5.If the item is too large for a standard box, use a double-walled box and reinforce every corner with tape.

What to avoid

• ✕Do not exceed the box's rated weight limit — it will fail in transit.
• ✕Do not leave corners unprotected; corners take the most impact when a box is dropped or stacked.
• ✕Do not stack anything heavy on top inside the same box.

Materials you need

• •A right-sized box — not much bigger than the item
• •Packing paper or air pillows for light cushioning
• •Standard packing tape

Step by step

1. 1.Choose a box close to the item's own size so it does not move around.
2. 2.Add a thin layer of cushioning at the bottom and top.
3. 3.Seal the box with tape across all open seams, not just the centre.
4. 4.Attach the shipping label flat on the largest face of the box, free of wrinkles or tape over the barcode.

What to avoid

• ✕Do not use an oversized box just because it is available — extra empty space lets the item move.
• ✕Do not cover the shipping label with extra tape over the barcode area.